Fiber-optic Link Capability Extends the Range of Network Deployment
The maximum distance between two IP devices via Ethernet UTP cable is 100 meters. To flexibly extend the deployment range of IP devices, the 3CI-SFP0204G’s SFP slot supporting 100BASE-FX/1000BASE-X, SFP modules, and more can reach a transmission distance of up to 120km.
Thus, building a network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs or FTTB (Fiber to the Building) for enterprises becomes so easy to users when long-distance deployment is employed. The 3CI-SFP0204G can handle extremely large amounts of data in a secure topology linking to a metro switch, backbone or high-capacity server.
Small but Tough
The 3CI-SFP0204G is specifically designed with durable components and strong housing to operate reliably in electrically harsh and climatically demanding environments like plant floors or curbside traffic control cabinets. With wide operating temperature range of -40 to 75 degrees C, the 3CI-SFP0204G is ideal for service providers, campuses and public areas to deploy outdoor wireless access points, outdoor IP cameras or IP phones in any places easily and efficiently.
Dual Power Input for High Availability Network System
The 3CI-SFP0204G features a strong dual power input system with wide-ranging voltages (9V~48V DC or 24V AC) incorporated into customer’s automation network to enhance system reliability and uptime. In the example below, when power supply 1 fails to work, the hardware failover function will be activated automatically to keep powering the 3CI-SFP0204G via power supply 2 alternatively without any loss of operation.
Low Power Consumption for Green Networking
The 3CI-SFP0204G, adopting the advanced green networking technology, provides cable length power saving, and link-up and link-down power saving. These features make the 3CI-SFP0104G consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently.
With the Auto Power Saving and IEEE 802.3az Energy Efficient Ethernet (EEE) Protocol, the 3CI-SFP0204G can automatically detect cable link status and network traffic, and thus is able to adjust power consumption accordingly. It enables the switch to consume less power when it is less active.
The 3CI-SFP0204G provides contact discharge of ±6KV DC and air discharge of ±8KV DC for Ethernet ESD protection. It also supports ±6KV surge immunity to improve product stability and protects users’ networks from devastating ESD attacks, making sure the flow of operation does not fluctuate.
|4-port 10/100/1000BASET RJ45 TP auto-MDI/MDI-X, auto negotiation
|2 1000BASE-SX/LX/BX SFP interface
Compatible with 100BASE-FX SFP
|Removable 3-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for Power 2
|1 x LED for system and power:
■ Green: DC Power
2 x LED for each copper port
■ Green: 1000Mbps LNK/ACT
■ Orange:10/100Mbps LNK/ACT
1 x LED for SFP fiber slot
■ Green: LNK/ACT
|9~48V DC, redundant power with reverse polarity protection, 24V AC power support
|Power Consumption / Dissipation
|DIN-rail kit and wall-mount ear
|IP30 metal case
|Dimensions (W x D x H)
|35 x 94 x 130 mm
|Switch Processing Scheme
|1M bits on-chip buffer memory
|Back pressure for half duplex
IEEE 802.3x pause frame for full duplex
|Throughput (packet per second)
Cat. 3, 4, 5, 5e, 6 UTP cable (max. 100 meters)
EIA/TIA-568 100-ohm STP (max. 100 meters)
|IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3az Gigabit SX/LX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1p Class of Service
|FCC Part 15 Class A, CE
|IEC 60068-2-32 (free fall)
IEC 60068-2-27 (shock)
IEC 60068-2-6 (vibration)
|Operating: -40~75 degrees C
Storage: -40~75 degrees C
|Operating: 5~90%, Storage: 5~90% (non-condensing)