200G-FR4-1
200G FR4

200G QSFP56 FR4 2Km Transceiver

3C-LINK 3C-QSFP56-FR4 optical transceiver is designed for 200GBASE-FR4 Ethernet links reach up to 2Km over Single-Mode Fiber (SMF) with FEC. It is compliant to IEEE802.3bs 200GBASE-FR4 standard. This high-performance module integrates four data lanes in each direction with 4x 50Gb/s (PAM4). Each lane can operate at a data rate up to 50Gb/s (PAM4) using the wavelength of 1271, 1291, 1311 and 1331nm. The electrical interface uses a 38-contact edge type connector.The central wavelengths of the 4 CWDM channels are 1271, 1291, 1311 and 1331nm as members of the CWDM wavelength grid defined in ITU-T G.694.2. The optical interface use a duplex LC connector.The optical/electrical connection and digital diagnostic interface are achieved through a QSFP56 MSA- compliant. The 200G QSFP56 FR4 transceiver incorporates 3C-LINK's proven circuit and COB technology to provide reliable long life, high performance, and consistent service.

3C-QSFP56-SR4 Compatible 200GBASE-FR4 QSFP56 1310nm 2km DOM Duplex LC SMF Optical Transceiver Module

3C-LINK 3C-QSFP56-FR4 QSFP-200G-FR4 Compatible QSFP56 Transceiver Module is designed for 200GBASE Ethernet throughput up to 2km over single-mode fiber (SMF) using a wavelength of 1295nm to 1309nm with duplex LC connectors.

3C-LINK 3C-QSFP56-FR4  QSFP-200G-FR4 Compatible QSFP56 Transceiver Module is designed for 200GBASE Ethernet throughput up to 2km over single-mode fiber (SMF) using a wavelength of 1295nm to 1309nm with duplex LC connectors.
This transceiver is compliant with IEEE 802.3cd, IEEE 802.3bs, QSFP56 MSA, SFF-8665, SFF-8024, and SFF-8679 standards. The built-in digital diagnostics monitoring (DDM) allows access to real-time operating parameters. It is suitable for 200G Ethernet, Data Center, and Cloud Networks.

Model No. 3C-QSFP56-FR4 Vendor Name 3C-LINK
Form Factor QSFP56 Max Data Rate 200Gbps
Wavelength 1271nm, 1291nm, 1311nm and 1331nm Max Cable Distance 2km
Connector Duplex LC Fiber Type SMF
Transmitter Type CWDM EML Receiver Type PIN
DDM/DOM Yes Temperature Range 0 to 70°C (32 to 158°F)
TX Power -4.2~+4.7dBm Receiver Sensitivity <-6.5dBm
Powerbudget 3.8dB Receiver Overload 4.7dBm
Typical Power Consumption ≤6W Extinction Ratio ＞3.5dB
Modulation Format PAM4 CDR (Clock and Data Recovery) TX & RX Built-in CDR
Transmit and Dispersion Penalty 4.5dB Host FEC Supported
Packaging Technology COB EMC (Electromagnetic Compatibility)
Supported
ProtocolsIEEE 802.3bs, QSFP56 MSA, SFF-8665, SFF-8636, RoHS 10   Warranty 3 Years
 

Recommended

Subscribe our newsletter to get our updates and stay in touch with 3C-LINK.

Company

Products

Solutions

News

Contact

Follow Us

Copyright © 2022 3c-link Corporation Limited.VOKO提供网站技术支持

Privacy Policy