Product Highlights
* Use SFP+ in QSFP+ Port of Your Device
* Tested in Targeted Switches for Superior Performance, Quality, and Reliability
* Works out of the Box, No Configuration Needed
* Low Insertion Loss
* High-Speed Electrical Interface Compliant to IEEE 802.3ba
* Compliant to SFF-8436 and QSFP MSA
* Hot Pluggable QSFP+ Form Factor
* Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
| Model No |
3C-QSFP-SFP+ |
Vendor Name |
3C-LINK |
| Form Type |
QSFP+ to SFP+ |
Max Data Rate |
40Gbps |
| Wavelength |
N/A |
Max Cable Distance |
N/A |
| Cable Type |
N/A |
DOM Support |
Yes |
| Commercial Temperature Range |
0 to 70°C (32 to 158°F) |
Protocols |
MSA Compliant |
Note:
1. ≤4m cable length is required if QSFP+ to SFP+ Converter Module is applied with 10G passive DAC.
2. ≤2m cable length is required if QSFP+ to SFP+ Adapter Converter Module is applied with 40G to 4x10G passive DAC.
Quality Certification
Quality and standards are the foundation of 3C-LINK.COM. We are dedicated to providing customers with outstanding, standards-compliant products and services. Fiber-MART.COM has passed many quality system verifications, like CE, RoHS, FCC, established an internationally standardized quality assurance system and strictly implemented standardized management and control in the course of design, development, production, installation and service.
Please Note: Installing a third party transceiver does not void your network equipment warranty. Network equipment manufacturers all have guidelines stating that warranty support on their products will not be affected.
Lifetime Warranty
All the fiber optic products in 3C-LINK COM are fully warranted against defects in material and workmanship with a lifetime guarantee. This warranty does not cover damage caused by accident, improper care, improper use, negligence, normal wear and tear, or the natural breakdown of colors and materials over extended time and use.
3C-QSFP-SFP+, the Q
SFP+ to SFP+ Adapter has a built-in SFP+ adapter under QSFP+ form factor, with data rate up to 14Gbps per channel. This QSA does not support read SFP+ DDM info.
2 Version for different I2C design,
Version A: 3C-QSFP-SFP+A adapter without EEPROM, the device will read DDM from the SFP transceiver that is connected into the QSA.
Version B: 3C-QSFP-SFP+B adapter with EEPROM, the device will read DDM from the QSA.
Notics:
Version B is equivalent to CISCO CVR-QSFP-SFP10G, but could not support Cisco N9K devices
.
| Model |
Spec |
PDF |
| 3C-QSFP-SFP+A |
40G to 10G Adapter without EEPROM |
 |
| 3C-QSFP-SFP+B |
40G to 10G Adapter with EEPROM |
|
Fiber Ethernet Conversion
Fiber Active System
Fiber Distribution
Splitter & WDM
Fiber Accessories
Fiber Cable
Intelligent Power
Intelligent Transportation
Telcom comuncation
Smart Cities
