* Support line protection of dual fiber and single fiber transmission network
* Support multiple working modes of automatic or manual switching
* Supporting real-time monitoring of main and backup routes
* Fast response: switching time<20ms
* Support automatic non-return and automatic return functions, automatic return time can be set to adapt to a variety of application scenarios
* Support panel button operation. The system can be operated by button on-site without a management card
* Support power-off and power-on retention functions
* OLP cards and network management cards are independent of each other and have no influence on each other
* Support multi-kinds of graphical interface network management, such as SNMP, Web
* Support AC power 220V, DC power -48V, and 1+1 power input protection
* Can plug into 3C-OTNS8600I , 3C-OTNS8600II and 3C-OTNS8600II Chassis become standalone device
Optical Line 1:1 Protection Card
|
Item
|
Parameter
|
|
Working wavelength range
|
1260nm ~ 1650nm
|
|
OLP type
|
OLPA (dual fiber 1+1 protection)
|
OLPB (dual fiber 1:1 protection)
|
OLPA-BD (single fiber 1+1 protection)
|
|
Switching time
|
＜20ms
|
＜40ms
|
＜20ms
|
|
Introduction loss
|
Main path
|
＜5dB
|
＜3dB
|
＜5.5dB
|
|
Backup path
|
＜5dB
|
＜3dB
|
＜5.5dB
|
|
Monitoring power range
|
-50 dBm ~+25dBm
|
|
Working temperature range
|
-10℃~60℃
|
|
Working humidity range
|
5%~95% no condensation
|
|
Storage temperature
|
-40℃~85℃
|
|
Equipment dimension
|
1U: 44 mm (H)×442 mm (W)×280 mm (D)
|
|
Network management
|
Support multi-kinds of graphical interface network management, such as SNMP, Web
|
|
Optical interface
|
LC/UPC
|
|
Power supply
|
AC: 90 ~ 260V or DC: -36 ~ -72 V (support 1+1 power input backup)
|
|
Typical power consumption
|
Full configuration<30W
|
|
Heat dissipation
|
Fan cooling
|
|
MTBF
|
＞100000 hours
|
Fiber Ethernet Conversion
Fiber Active System
Fiber Distribution
Splitter & WDM
Fiber Accessories
Fiber Cable
