4U

4U Fix Patch Panel

An optical distribution frame (ODF) is a frame used to provide cable interconnections between communication facilities, which can integrate fiber splicing, fiber termination, fiber optic adapters & connectors and cable connections together in a single unit. The basic requirement is ODF should allow for easy access to the connectors on the front and rear of those ports for insertion and removal. It is usually used as the interface between optical transmission network, optical transmission facility and between optical cables in access network of optical fiber subscribers. It can also work as a protective device to protect fiber optic connections from damage.

Fixed Type Rack Mount 4U Fiber Patch Panel

Provide up to 96-core(SC,FC,ST) or 192 core(LC) fiber fusion and jumper Aluminum alloy, electrostatic powder paint

*  Use with the photoelectric transmission equipment of the machine room
*  Provide optical fiber jumper, fusion and management
*  Provide up to 96-core(SC,FC,ST) or 192-core(LC) fiber fusion and jumper
*  Aluminum alloy, electrostatic powder paint
*  Applicable to 19” and 23” cabinets or racks
*  There are inlet and outlet ports, and rubber sleeve protection to prevent rodent insects from entering
*  Panel adopts movable button design and easy assembly. Panel can be changed to ST. SC. FC according to requirements.
*  Also, there are two type of panel, 45˚ bevel of plastic panel and 90˚ of iron panel.
*  The cabinet can be equipped with a storage tray for welding according to actual needs.
*   Adaptor selection: 45˚ bevel of plastic panel - SC / ST / LC / FC
*  90˚ of iron panel - SC / ST / LC / FC / MPO / MTRJ according to requirements
 
Model 3C-ODF-F96-4U-1.2AL-W-SC
Height 4U(170mm)
Capacity of splice 96F
Dimension W*D*H(mm) 410*310*170mm
Material  AL or upon request 
Painting Electrostatic power paint
Thickness(mm) 1.2/1.5
Weight(KG) 3.6

Recommended

Subscribe our newsletter to get our updates and stay in touch with 3C-LINK.