Slim Type with more Practicability and Convenience
3C-LINK 3CI-S1005H, an Industrial 5-port Fast Ethernet Switch, provides non-blocking wire-speed performance in harsh industrial environment. It also provides 5-port 10/100BASE-TX RJ45 copper interfaces delivered in an IP30 rugged, strong case with redundant power system. Its slim case is suitable for such applications as surveillance system deployments, control management and wireless service in climatically demanding environments with wide temperature range from -40 to 75 degrees C.
Energy Saving with Lower Power Consumption
The 3CI-S1005H, adopting the advanced green networking technology, provides the IEEE 802.3az protocol based power saving. This feature makes the 3CI-S1005H consume very low power in full load operation mode, which helps conserve energy effectively but maintains high performance efficiently.
Stable Performance under Difficult Environments
The 3CI-S1005H provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the 3CI-S1005H can be placed in almost any difficult environment. The 3CI-S1005H also possesses an integrated power supply source with wide range of voltages (12 to 48V DC, 24V AC) for worldwide high availability applications requiring dual or backup power inputs.
Robust Switch Performance
Built in a high-performance switch architecture, the 3CI-S1005H comes with five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps, and the 1K MAC address. Thus, the 3CI-S1005H can transfer wire-speed packets without the risk of packet loss. The flow control function enables the 3CI-S1005H to provide fast and reliable data transfer.
All of the RJ45 copper interfaces in the 3CI-S1005H support 10/100Mbps auto negotiation for optimal speed detection through RJ45 Category 5 or 5e cables. The standard auto-MDI/MDI-X support can detect the type of connection to any Ethernet device without requiring special straight-through or crossover cables.
|
Hardware Specifications |
| 10/100BASE-TX Auto MDI/MDIX Ports |
5 |
| LED Indicators |
1 x LED for Datarate:
■ Green: Data Rate 100M
1 x LED for each Copper Port
■ Green: 10/100 LNK/ACT |
| Enclosure |
IP30-rated metal case |
| Dimensions (W x D x H) |
130 x 94 x 35 mm |
| Weight |
400g |
| ESD Protection |
6KV DC |
| EFT Protection |
6KV DC |
| Power Requirements |
12~48V DC, redundant power with polarity reverse protection function, 24V AC power support |
| Power Consumption/Dissipation |
1.6 watts/5.4BTU |
| Installation |
DIN rail kit and wall-mount ear |
| Alarm |
Provides one relay output for power failure
Alarm relay current carry ability: 3A @ DC 30V |
| Connector |
Removable 6-pin terminal block
Pin 1/2 for Power 1; Pin 3/4 for fault alarm; Pin 5/6 for Power 2 |
|
Switch Specifications |
| Switch Processing Scheme |
Store-and-Forward |
| Address Table |
1K |
| Buffer Memory |
Embedded 448K bits packet buffer |
| Flow Control |
Back pressure for half duplex,
IEEE 802.3x pause frame for full duplex |
| Switch Fabric |
1Gbps |
| Throughput (packet per second) |
0.74Mpps |
| Network Cables |
10BASE-T: 2-pair UTP Cat. 3, 4, 5, up to 100 meters
100BASE-TX: 2-pair UTP Cat. 5, 5e up to 100 meters |
|
Standards Conformance |
| Standards Compliance |
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3x Full Duplex Flow Control
IEEE 802.3az Energy Efficient Ethernet |
| Temperature |
Operating: -40~75 degrees C
Storage: -40~75 degrees C |
| Humidity |
Operating: 5% to 95%, Storage: 5% to 95% (non-condensing) |
| Regulatory Compliance |
FCC Part 15 Class A, CE |
| Stability Testing |
IEC60068-2-32 (free fall)
IEC60068-2-27 (shock-proof)
IEC60068-2-6 (vibration-proof) |
Fiber Ethernet Conversion
Fiber Active System
Fiber Distribution
Splitter & WDM
Fiber Accessories
Fiber Cable
