
CCWDM Module
An optical distribution frame (ODF) is a frame used to provide cable interconnections between communication facilities, which can integrate fiber splicing, fiber termination, fiber optic adapters & connectors and cable connections together in a single unit. The basic requirement is ODF should allow for easy access to the connectors on the front and rear of those ports for insertion and removal. It is usually used as the interface between optical transmission network, optical transmission facility and between optical cables in access network of optical fiber subscribers. It can also work as a protective device to protect fiber optic connections from damage. 3C-LINK can offer customer requirement ODF products.
Provide up to 24-core(SC,FC,ST) or 48-core(LC) fiber fusion and jumper Aluminum alloy, electrostatic powder paint Applicable to 19” and 23” cabinets or racks
 * Provide optical fiber jumper, fusion and management
 * Provide optical fiber jumper, fusion and management * Provide up to 24-core(SC,FC,ST) or 48-core(LC) fiber fusion and jumper
 * Provide up to 24-core(SC,FC,ST) or 48-core(LC) fiber fusion and jumper * Aluminum alloy, electrostatic powder paint
 * Aluminum alloy, electrostatic powder paint * Applicable to 19” and 23” cabinets or racks
 * Applicable to 19” and 23” cabinets or racks * There are inlet and outlet ports, and rubber sleeve protection to prevent rodent insects from entering
 * There are inlet and outlet ports, and rubber sleeve protection to prevent rodent insects from entering * Panel adopts movable button design and easy assembly. Panel can be changed to ST. SC. FC according to requirements.
 * Panel adopts movable button design and easy assembly. Panel can be changed to ST. SC. FC according to requirements. *  Also, there are two type of panel, 45˚ level of plastic panel and 90˚ of iron panel.
*  Also, there are two type of panel, 45˚ level of plastic panel and 90˚ of iron panel. * The cabinet can be equipped with a storage tray for welding according to actual needs.
 * The cabinet can be equipped with a storage tray for welding according to actual needs. * Adaptor selection: 45˚ bevel of plastic panel - SC / ST / LC / FC
 * Adaptor selection: 45˚ bevel of plastic panel - SC / ST / LC / FC * 90˚ of iron panel - SC / ST / LC / FC / MPO / MTRJ according to requirements
 * 90˚ of iron panel - SC / ST / LC / FC / MPO / MTRJ according to requirements| Model | 3C-ODF-S24-1U-1.2AL-W-SC | 
| Height | 1U(44mm) | 
| Capacity of Splice | 12/24F | 
| Dimension W*D*H(mm) | 410*310*41 | 
| Material | AL or upon request | 
| Painting | Electrostatic powder paint | 
| Thickness(mm) | 1.2/1.5 | 
| Weight(KG) | 2.0 with Rail | 

3CF-SFP+-SRP
3CPG-434S1OM-LX
3CW-QSFP28-23-LR& 3CW-QSFP28-32-LR
3C-56GB-CU1M
3CI-SFP0204G
3C-OTNS8600V OTN System
3C-ONTS8600I-OLS
3C-HDMI-M4K60-T10
3C-ONU-X100W
3C-XM100DG
3C-AD-SCU
 
                        
                    Copyright © 2022 3c-link Corporation Limited.VOKO提供网站技术支持
Privacy Policy